What About Hellvape Dead Rabbit Solo RTA?

Hellvape has released the Dead Rabbit Solo RTA. The tank was distinguished by a standless base for one spiral, a 4 ml flask and adjustable airflow with reliable protection against leaks.



The Dead Rabbit Solo RTA 24mm received a small steel body, made in an original, but rather discreet style. The color palette was diversified into six versions. Air intake holes with a faceted rotating ring were placed above the tank, providing reliable protection against accidental leaks. A convenient retractable roof was installed on top, responsible for refueling. In the center of the top cap we made a small pedestal for a wide Delrin drip tip with an 810 fit. The dome was decorated with a traditional engraving of a dead rabbit.

Under the dome there is an unusual base, represented by a spacious postless platform with four slots for installing one coil. The winding legs will be fixed vertically in the slots and clamped on the sides with screws using a simple screwdriver. Air is supplied to the hot spiral from below, through a small grille with three holes. The tightening intensity is adjusted using a rotating ring. The reservoir volume can be increased from 2 to 4 ml using an expanded flask.

You may also like: Thunderhead Creations Blaze RTA